The ink absorber is one of the commonly used accessories of the piezoelectric printer. Its main function is to eliminate the air in the nozzle and ink tube to ensure that the ink jet line of the nozzle is smooth. The structure of the ink absorber is very simple, but there are some skills and methods when using it. If it is not used properly, it is easy to cause damage to the nozzle. Follow stormjet to understand the use of the ink absorber.

01. When the suction of the ink absorber is not available, do not pull it out immediately, otherwise it will cause the pressure of the pipeline to be unbalanced, which will cause nozzle missing. When there is no pumping force, you must remember to put the syringe for more than 10 seconds and then remove it, so that the pressure of the nozzle line is balanced, there is a high probability that there will be no nozzle missing.

02. Do not let go when absorbing ink with the absorber. If you accidentally get the ink in the ink absorber into the nozzle: if the ink in the syringe is the same as the ink in the nozzle, it will not matter. If an ink absorber is used on several nozzles, this will cause the ink to be pumped back and mixed.

The above two points are what you should pay attention to when using the ink absorber of the stormjet printing machine. I hope it can help everyone.