If stormjet car sticker printer is used or placed for a long time,optical axis will become very dirty. Today, stormjet car sticker printer will bring you cleaning and maintenance methods of optical axis. I hope it will help you in daily maintenance work.

1.Keep ambient temperature of stormjet car sticker printer at room temperature (about 22 degrees Celsius), maintain a certain humidity, and minimize dust.

2.Regularly maintain stormjet car sticker printer to reduce dust, see following for specific project operations:

(1) Trolley sliding optical axis: wipe it daily, add alcohol with a cloth or paper towel, and it is forbidden to wipe ink cartridge with any oil. Clean it weekly, remove it and rinse with water, and then wipe it dry. Do not lose the ink wiper and place it correctly.

(2) Encoder strip: clean weekly, observe daily, wipe up and down with distilled water or alcohol on cotton swabs, do not use too much force.

(3) The contact piece of ink cart and ink head of stormjet car sticker: check daily to ensure that there is no ink stain and prevent excessive alcohol that may dissolve mounting glue of microcircuit.