Car sticker advertisements can advertise a variety of products and cover a wide range of people. Therefore, stormjet car sticker printershares some knowledge about the car stickers printed by stormjet printing machine.

1. About the stormjet car sticker printer working environment
Stormjet car sticker printer prints car stickers. In order to ensure the stickiness of the car stickers, it must be produced in a sealed and dust-free workshop. And the temperature of the workshop must be kept within 15℃-30℃, and the humidity must be kept between 35%-65%.

Too low temperature will affect the fluidity of the ink, not only affecting the final printing effect of the car sticker, but also may cause damage to the print head of stormjet car sticker printer; and too high humidity will cause the surface of the car sticker to become wet, affect the ink adsorption, and also cause the car sticker adhesive has decreased.

2. Turn on the heating system of stormjet car sticker printer
During the printing process, in order to maintain the overall drying speed and drying effect of the car sticker, it is recommended to turn on the external heating drying system of stormjet car sticker printer during printing process to ensure the final image quality of the car sticker.

stormjet car sticker printer is equipped with an intelligent drying system and multiple temperature modes, which are synchronized with printing, so as to ensure that the car sticker is printed and dried, and it is more convenient to use.

In addition, during the storage process of the car stickers, soft and clean gloves should be worn when touching the product to avoid scratches or stains on the surface of the product.

3. Test before printing
For different batches of car sticker products, it is recommended to do a small-format printing test before printing to confirm whether the printing effect is consistent. At the same time, before printing on stormjet car sticker printer, check whether the car sticker material is in good condition and free from blistering and wrinkles.

In addition, it is necessary to ensure that stormjet car sticker printer is trouble-free, the ground wire is well connected, and the various settings of stormjet car sticker printer such as printing pass, speed, curve parameters, etc. match the car sticker printing. After printing, wait for the ink to fully dry before performing the film cutting operation to prevent the screen from being dirty and disfigured.

Reminder:
1.After the car sticker product is printed, put the unused car sticker material back in the original package to avoid moisture affecting product performance due to improper storage;

2. After the car sticker advertising product is filmed and cut, in order to facilitate transportation, the car sticker should be rolled into a cylindrical shape as much as possible, and the picture should be facing outwards. The inner diameter of the rolled product should not be less than 8.5cm. This not only facilitates storage, but also effectively avoids arching of the car sticker surface.