When stormjet car sticker printer is not running out of material, it can't print all the time, indicating that there is a lack of material. When encountering this kind of problem, what should I do?

Material tester of stormjet car sticker printer uses sensor to test whether there is material. If material tester fails, an error will appear, indicating that there is a lack of material.

If an error occurs in daily situations, we can troubleshoot it through following steps.

1. Check whether material tester of stormjet car sticker printer is burnt out. Solution: Replace material tester.

2. Is material sensor dirty? Solution: Use cotton swab with a little alcohol to clean material sensor of stormjet car sticker printer.

3. Whether material sensor of stormjet car sticker printer is installed correctly. Solution: Remove material tester and reinstall it.

4. Has the shredded material been taken out in time? Solution: Remove excess shredded material in time.

5. Whether cable of material tester is properly inserted. If there is problem if cable is not properly inserted, an error will be reported directly. At this time, you need to check whether car is connected correctly.