Many stormjet eco solvent printer users have reported that when the temperature continues to drop, Stormjet eco solvent printer may experience oblique spray nozzles, flying ink, and false images when the machine is working. In fact, this is all caused by the "temperature".

1.The temperature of the working environment is very important for Stormjet eco solvent printer. If the temperature is too low, Stormjet eco solvent printer will have oblique spray, flying ink, and false printing. When the user finds that the image of the test strip is false, he can use an electric heater or a hair dryer to heat up printer head to avoid such problems when Stormjet eco solvent printer is working. In addition, before using Stormjet eco solvent printer, the user should turn on the air conditioner or electric heating fan in advance to warm up the working environment. The temperature should preferably be kept at 15℃-30℃ to keep Stormjet eco solvent printer in the best working condition, which will not only improve work efficiency, but the printing effect is also excellent.

2. In addition, static electricity is easy to generate in winter, especially in air-conditioned rooms, where the air is extremely dry, which is a hotbed for static electricity. Excessive static electricity will increase the working loss of Stormjet eco solvent printer and affect the life of the print head. Therefore, when the user turns on the air conditioner, it is best to turn on the humidifier synchronously to increase the air humidity. The humidity should be maintained at 35%-65%. The humidifier should be connected to Stormjet eco solvent printer board. Keep a distance to avoid condensation of water droplets, which may cause a short circuit on the board. In fact, another coup to prevent static electricity is to connect a ground wire to Stormjet eco solvent printer and bury it underground to a depth of not less than 2 meters. You can also pour salt water in the burial area to enhance conductivity.

In the dry weather in winter, static electricity and dust can damage printer head greatly. If the static electricity is too high, the print head or circuits are easily damaged. Dust can easily block the nozzles and cause the printed image to break. So when you use Stormjet eco solvent printer in winter, you should pay attention to controlling the printing speed to prevent excessive static electricity. Secondly, pay attention to cleaning printhead regularly to prevent dust from clogging the nozzle.

3. Too low temperature will also change the viscosity of ink, especially inferior ink. In winter, the viscosity of ink will increase, clogging the nozzle and causing oblique spraying and nozzle missing, which will affect the life of printer head. Therefore, when purchasing inks, users should choose inks with good weather resistance and good quality. It is recommended that users choose stormjet original inks, imported raw materials, smooth use, viscosity is not affected by temperature, and long-term output. In addition, pay attention to the ink storage. The ink is prone to qualitative changes if it is kept in an environment below zero for a long time. It is best to store it in an environment of 15°C-30°C.

The winter weather is special, and the impact on Stormjet eco solvent printer is very obvious. I hope users will pay special attention to the above points when using the Stormjet eco solvent printer. Only a good working environment can help printing machine bring you the best experience.