In the process of using the wallpaper printer, adding ink is one of the common operations. What problems should be paid attention to when refilling ink cartridges? Today,stormjet wallpaper printer group will share with you the tips needing attention in the process of adding ink.

When refilling ink, make sure that the wallpaper printer’s ink cartridge is completely intact. You can test it with water beforehand. If the ink is replaced with a new one, the original ink cartridge should be thoroughly cleaned, otherwise the mixing of the two different inks will cause a chemical reaction, which will lead to plugging.

Some users use the built-in cleaning function of the machine for convenience. In fact, this is not good. It is best to wash it with clean water several times until clear water is seen.

Be sure to change the ink in an appropriate amount. For the sake of saving trouble, some users fill up the ink every time. This will cause the ink cartridge to leak during use, and the leaked ink may wet the inside of the printer other parts, so as to damage the wallpaper printer.

After installing the ink, it is best not to put the ink cartridge back into the cartridge holder immediately. Let it stand for a few minutes before putting it on again. This is to allow the ink to slowly penetrate into the corners of the sponge pad to ensure the ultimate print quality. Avoid exposing the ink cartridge to the air for a long time, which is easy to produce dry up and clogging.

Finally, remind the majority of wallpaper printer users not to wait until the ink is used up. It is best to add ink to the ink cartridge when there is 10% of the ink left. If you really can’t see the remaining amount of ink, you have to observe the printing effect and find if there are broken lines in the printed image, ink should be added.