Since print head is one of important parts of stormjet car sticker printer, its price is also relatively high, especially due to impact of price increase of Epson print heads in recent years, cost and price of stormjet car sticker printer are rising sharply. If print head is damaged due to improper operation of stormjet car sticker printer, it will directly affect operation of stormjet car sticker printer. Therefore, pay attention to following issues when replacing print head of the stormjet car sticker printer:

1.Firstly, check stormjet car sticker printer to see if there is any problem with related circuit connected to the print head, to avoid damage to print head due to printer related voltage circuit, motherboard board card, etc., and connect a new print head if unknown , may cause damage to new printer head.

2. Ensure that power supply voltage connected to stormjet car sticker printer is stable. It is very common to damage print head due to the unstable power supply voltage. Therefore, stormjet car sticker printer manufacturer recommends that user purchase a UPS power regulator and connect it to stormjet car sticker printer to provide a stable power supply voltage.

3. While cleaning stormjet car sticker printer head, it is also necessary to clean ink supply tube to avoid allowing impurities that existed before to enter head again, which will quickly and easily cause blockage. When printer head is soaked, etc., cleaning fluid should not be too much, and do not exceed metal cover plate under head. Otherwise, it is easy to cause printhead circuit to enter cleaning fluid and burn printhead. Be sure to dry plug before installing stormjet car sticker printer, otherwise printer head will burn easily.

Pay attention to above points, and users are hoped to pay attention before replacing printer head on stormjet car sticker printer. Paying attention to details can avoid big losses for you. The correct maintenance of stormjet car sticker printer will greatly extend the use of printing machine and print head.