What is reason that Stormjet car sticker printer suddenly stops printing during printing process? Stormjet car sticker printer manufacturer summarizes a few points for user reference.

1. Phenomenon
①Computer host has data output, but Stormjet car sticker printer does not work
②Computer host has data output, but Stormjet car sticker printer stops working in middle of process without any fault display

2. Reason:
● Parallel port of host or Stormjet car sticker printer is faulty.
● Parallel port of Stormjet car sticker printer is faulty.
● Blank job output page.
● Stormjet car sticker printer failed to detect paper correctly.
● Computer virus infection.

3. Solution:
● Try to change parallel port line or use another computer to contact plotter before printing out.
● If output software has a "print preview" function, please check first whether you have selected wrong print range or paper size.

For example: printing range is A4, but A0 is used for paper selection. Some software will output printing range in center of A0, leading to a long period of blank data output, which seems to be no work.

● Check whether there is work under menu of "Display setting value".
● Check whether there is a normal paper width under the "Display Setting Value" menu, if it is 0, 0, 0, 0, please select "Service Function Menu"-"Diagnosis Menu"-"Continuous Test", and confirm input port (Parellelport) is there any error (Parallel port tested failed means it has been damaged).

Note: Damage of mainboard input parallel port must be caused by instantaneous impact of unplugging the plug when Stormjet car sticker printer power is on or static electricity is not discharged. In severe cases, PC mainboard, printer mainboard, and Stormjet car sticker printer may be burned out. Therefore, please pay attention to parallel cable connector: ①Unplug the power cord. ②Make sure that PC terminal is completely connected to the same ground and use a metal wire to ground the test discharge.