Stormjet car sticker printer has been widely used at present. How to solve the problem that the car cannot be reset after stormjet car sticker printer is turned on during the use of printing machine? Stormjet car sticker printer manufacturer summarized the following situations:

1. The reset sensor is in poor contact;
2. The raster decoder is damaged;
3. The computer is not connected to stormjet car sticker printer;
4. The driver board is burned out.

Elimination method:

1. Without plugging in the USB cable, can you move the car by pressing the left and right keys when the LCD screen displays COOLCOLOR, or whether the up and down keys to see if the printer can feed the paper back and forth. If not, you need to replace the drive board.
2. After starting up, the cart has been moving to the left, check whether the reset switch plug is loose or replace it with a new one.
3. Check the encoder strip sensor or replace it with a new one.
4. Check whether the USB cable connection is normal, whether stormjet car sticker printer can be found in the computer hardware device manager when plugging and unplugging the USB cable, if not, please replace the main board.