When stormjet car sticker printere is not running out of paper, but it can't print all the time, it prompts that there is a lack of paper. When encountering this kind of problem, what should I do?

The paper tester of stormjet car sticker printer uses a sensor to test whether there is paper. If the paper tester fails, an error will appear, indicating that there is a lack of paper.

If an error occurs in daily situations, we can troubleshoot it through the following steps.

1. Check whether the paper tester of stormjet car sticker printer is burnt out. Solution: Replace the paper tester.
2. Is the sensor dirty? Solution: Use a cotton swab with a little alcohol to clean the sensor of stormjet car sticker printer.
3. Whether the paper tester is installed correctly. Solution: Remove the paper tester and reinstall it.
4. Has the shredded paper been taken out in time? Solution: Remove excess shredded paper in time.
5. Whether the cable of the measuring line is inserted properly. If the cable is not plugged in and there is a problem, it will directly report Internal ERROR shutdown Bad carriage papersenso. At this time, you need to check whether the carriage of stormjet car sticker printer is properly connected.