There will always be more or less problems in the use of stormjet eco solvent printer, such as disconnection, image misalignment, ghosting, and color cast. So if there are garbled characters in the picture, how to solve it?

The following stormjet eco solvent printer will lead you to briefly understand a few common reasons:

1. There is a problem with the USB cable of stormjet eco solvent printer, you can check whether the USB cable is plugged in tightly or replace a USB cable;

2.There is a problem with the main board data cable of stormjet eco solvent printer. You can turn off stormjet eco solvent printer and re-plug the data cable on the main board, and then restart printing machine to check whether the pictures can be printed normally;

3. Static electricity problems, general static electricity problems may also cause misalignment and ghosting, so you must connect the ground wire when using stormjet eco solvent printer to avoid many problems caused by electrostatic interference;

4. If it is a garbled phenomenon of a certain color, it may be a problem with the nozzle of that color. You can clean the nozzle or replace the nozzle to try;

5. The printing software buffer space on the computer is not enough to cause garbled characters in the picture. Generally, when printing pictures, do not overuse the computer, and try not to install anti-virus software on this computer to avoid some conflicts between the computer and stormjet eco solvent printer.