In recent years, UV printers have been rapidly popularized and applied in in various industries. However, due to the novelty of UV printers for many manufacturers still have problems in printing output. For example, manufacturers saw that UV printers can print very thick three-dimensional effects, after they bought them, they found that there was a problem with the ink output thickness. The top ten brands of UV printers, Stormjet, will elaborate on how to adjust the ink output thickness of UV printers.
1.Adjusting the ink thickness according to the material characteristics of the media
If the material is soft, or the gap is large, and the color of the media is dark, the ink output needs to be increased by about 20-40%.

2. According to the output image requirements
If the output image has darker colors, higher saturation requirements, and brighter colors, then the output thickness of the ink is also relatively thicker.

3. According to special requirements
According to the actual special output situation, for example, if the relief three-dimensional output is to be performed, the output thickness of the ink needs to be thicker.

4. How to set the output ink thickness?
This needs to set the percentage of the inkjet volume in the printing software, and can also set the number of times of printing. If you can set these two points well, you can achieve both ink saving and maximum thickness output. Of course, the thickness of the output ink is not as thick as possible. Sometimes it is too thick, which will affect the color restoration of the output.

5. The feather percentage can also be set.
The feathering percentage can generally be set between 0-200%. If the feathering value is higher, the printed image quality will be more delicate and the color restoration will be higher, but at the same time the printing speed will also become slower.