Some customers may encounter the printing pause problem when using the advertise printer, for example: the printhead of the printer goes to both ends and stops for a long time.After the Maintop sends the print command, during the printing and output process of the printer, the printhead frame moves slowly or quickly, which is unstable. When a picture arrives at the second half, it can move faster, and the first half is very slow. After a long time of continuous printing, there will be obvious slow printing.
When encountering the above-mentioned problems of the advertise printer,there are some solutions for solving the common problems.

First, use the exclusion method to check, first of all, the connection problem between the printer and the computer, such as poor computer configuration and slow operation, or computer operating system failure, such as infected with computer malicious virus, Trojan horse program, etc., resulting in slow operation of the computer operating system, slow data transmission to the Maintop software on the computer and causing the printing pause problem. At this time, we can replace the computer to test the printing and eliminate the printing pause caused by computer problems. Or re-install the computer operating system and use relevant software of Maintop to test and solve the problem.
Second, the printer is connected to the computer. It is recommended that the computer be directly connected to the printer, and the original data cable be used. It is recommended that the data cable is not too long. If it is not an original data cable or a long data cable is connected, it will also affect the data transmission of the printer.
Third, the data control board problems of advertise printer,such as the heat on the chip of the data control main board or the fragile electronic components of a chip will also affect the printing. At this time, you need to repair the board or replace the data control board to solve it.