In the process of using the Stormjet bags printing machine, it is very important to connect the ground wire, because the ground wire or the ground wire is not connected properly,due to long-term use, static electricity is not discharged anywhere, which will reduce the service life of the digital printer printhead. It may also cause the phenomenon of bags printing machine crash, so how do we get the ground wire?
1. The ground wire on the digital printer should be the metal part of the printer closest to the mainboard.
2. The ground wire should not be too long, it is better to control it within 3-5 meters.
3. It is connected to the ground 1.5-2m deep, and the surrounding area is filled with saline water, and it must contact the soil.
4. A ground wire must also be installed for the computer, it is best to use it separately and do not use the same wire with the machine.
5. The ground point cannot be shared with the ground wire of the lightning rod of the building, nor can it be connected with the ground wire of the high-voltage electrical appliance.
6. The ground wire should be made of single-stranded copper wire or coiled wire. Copper wire is preferred, with a diameter of 4mm or more.
7. The two ends of the wire should be welded to the wire pin or fastened with bolts, do not loosen, otherwise it will easily ignite and damage the digital printer.